ha / hd60 series ? ratings from 25a to 125a @ 48-660 vac ? scr output for heavy industrial loads ? ac or dc control ? zero-crossing (resistive loads) or random-fire (inductive loads) output ? low leaka g e ( snubberless ) product selection control voltage 25a 50a 90a 125a 3-32 vdc hd6025 hd6050 hd6090 hd60125 90-280 vrms ha6025 ha6050 ha6090 ha60125 18-36 vrms ha6025e ha6050e ha6090e ha60125e available options output specifications (1) description 25a 50a 90a 125a operating voltage (47-63hz) [vrms] 48-660 48-660 48-660 48-660 transient overvoltage [vpk] 1200 1200 1200 1200 maximum off-state leakage current @ rated voltage [marms] 5 5 5 5 minimum off-state dv/dt @ maximum rated voltage [v/sec] (2) 500 500 500 500 maximum load current (3) [arms] 25 50 90 125 minimum load current [marms] 40 40 40 150 maximum 1 cycle surge current (50/60hz) [apk] 285/259 1779/1621 1145/1200 1670/1750 maximum on-state voltage drop @ rated current [vpk] 1.7 1.7 1.7 1.7 thermal resistance juncti on to case (rjc) [c/w] 1.02 0.63 0.28 0.22 maximum 1/2 cycle i2 t for fusing (50/60hz) [a2 sec] 285/259 1779/1621 6560/5976 13950/12709 minimum power factor (with maximum load) 0.5 0.5 0.5 0.5
input specifications (1) description d pref ix a prefix e suffix control voltage range 3-32 vdc (7) 90-280 vrms 18-36 vrms maximum turn-on voltage 3.0 vdc 90 vrms 18 vrms minimum turn-off voltage 1.0 vdc 10 vrms 4.0 vrms maximum reverse voltage -32 vdc - - typical input current 2.0 ma (6) 2 ma @ 120 vrms, 4 ma @ 240 vrms 3 ma @ 24 vrms nominal input impedance [kohms] see note 6 60 9.0 maximum turn-on time [msec] (5) 1/2 cycle 10 10 maximum turn-off time [msec] 1/2 cycle 40 40 general specifications description parameters dielectric strength, input/output/base (50/60hz) 4000 vrms minimum insulation resistance (@ 500 v dc) 10 9 ohm maximum capacitance, input/output 8 pf ambient operating temperature range -40 to 80 c ambient storage temperature range -40 to 125 c weight (typical) 3.0 oz (86.5 g) encapsulation thermally conductive epoxy terminals screw and saddle clamps furnished, unmounted recommended terminal screw torque range: 6-32 screws - 10 in/lbs. 8-32 & 10-32 screws - 20 in. lbs. fastons: single pair (up to 25a) double pair* (50a model only) *caution: user must connect to both pairs general notes 1) all parameters at 25c unless otherwise specified. 2) off-state dv/dt test method per eia/narm standard rs-443, paragraph 13.11.1 3) heat sinking required, for derating curves see page 2. 4) 24 vac input option, e suffix 5) turn-on time for random turn-on versions is 0.02 msec (dc control models) 6) input circuitry incorporates active current limiter. 7) for relays with option ?g? minimum control voltage is 4.5vdc mechanical specifications
thermal derate information agency approvals e1 16 95 0 lr 81 68 9 10 14 3 ug rev. 012711
annex - enviromental information
|
